Requirements Profile Form

* required field
General Information
* Customer:
* Email:
* Project Name
* Application - Equipment to utilize seal
Seal location and size
Seal Location:
(please provide assy drawing)	(Valid filetypes: .jpg, .jpeg, .gif, .png, .doc, .docx, .xls, or .xlsx)
Maximum seal Diameter (mm):
Minimum Seal Diameter (mm):
Application environment and characteristics
Seal rotational speed range, typical and maximum (rpm):
Maximum rpm duration:
Maximum radial movement (mm):
Maximum axial movement (mm):
Maximum operating temp requirement (degrees C):
Minimum operation temp requirement (degrees C):
Lubrication (oil or grease):
Lubrication Manufacture and Name:
Viscosity:
Lubrication fill level (from seal center):
Internal pressure of sealing chamber (psi):
Expected pressure pulses / oscillations:
External Environment
Expected dirt type:
Expected external pressure (psi):
Expected mud packing (yes/no):
Usage Expectations
First samples (quantity and date needed):
Estimated annual usage:
Target start of production:
Comments

Robots Only

> Contacting Morcor

1.888.545.6994
191 Butler Road
PO Box 580
Kittanning, PA 16201
USA

Fax: 724-545-6995